MACHINES

$750.00
Buy Now

ATX-2 Automatic Transmission Fluid Exchanger

The zMAX® Automatic Transmission Fluid Exchanger is the first transmission fluid machine to offer fully automatic operation using an accurate exchange process. This machine uses two weight scales: one for the new fluid tank and one for the used fluid tank. Just hook up to the transmission cooler line with a no-drip quick coupler system, press the button for the desired capacity, and walk away.The machine automatically and continuously weighs the amount of fluid being pumped into the used fluid tank inside the machine. Its microprocessor then matches the machine's fill pump precisely to the speed of the transmission pump, providing a true one for one continuous exchange of fluid. The machine automatically alerts the technician if the hoses are hooked up in reverse flow direction, an important safeguard. Also, a patented by-pass function is used to re-route the fluid through the machine and back to the vehicle when the process is complete or during a power outage. This valuable feature protects the vehicle from inadvertent damage which can occur from other machines. The entire exchange takes an average of 2-5 minutes and frees the technician to perform other services.

  • Fully Automatic Operation - Press the fluid amount you wish to exchange and walk away. There is an audible alert when exchange is complete.
  • Leading Accuracy - Digital weight scale technology provides true fluid mass measurement and eliminates inaccuracies due to fluid viscosity or temperature.
  • Multi-Fluid Capability - Easily change fluid types. Remove one type of fluid from the machine with the push of a button and replace with another type. Separate drain hose eliminates contamination of fluid.
  • Rapid Exchange - Large fill pump provides a quick fluid exchange. Precision mass measurement fills accurately and eliminates the need to adjust fluid level after exchange.
  • Leading Exchange Percentage - Proportional motor control prevents fluid turbulence and mixing to provide effective displacement of old fluid.
  • Simple Operation - Electronic keypad with clean, logical layout provides intuitive interface.
  • Vehicle Protection - Special by-pass circuit protects transmission in the event of power outage.
  • Comprehensive Adapter System - Color-coded, quick connect adapters with convenient reference chart makes vehicle hook-up quick and easy.

All machines are slightly used.

$650.00
Buy Now

BFX-1 Brake Fluid Exchanger

The zMAX® Brake Fluid Exchanger is the new standard for brake fluid service - fast, simple, effective, and profitable. This machine does the job right. It effectively removes old brake fluid and automatically replaces it with new clean fluid. A special push/pull process flushes the entire system and provides the highest quality service. Provides maximum performance, throughout. Fast, Simple, and User Friendly

  • Universal adapters with vehicle reference quick guide for easy hook-up
  • Logical controls with intuitive layout
  • Automatic shut-off and Illuminated warning lights when new fluid tank is empty and used tank is full
  • Easy hose hook-up and storage when service is complete
  • Convenient pistol wand allows quick and accurate filling of master cylinder


Connect to the vehicle then complete the fluid exchange in only 5-10 minutes! Machine Operation is as easy as 1-2-3!

1. Empty master cylinder: Press the "empty master cylinder" switch and insert the drain hose into the master cylinder.

2. Fill master cylinder: Attach wand to fill hose, press "fill master cylinder" switch and squeeze the wand trigger to fill master cylinder to max marking on reservoir.

3. Exchange brake fluid: Attach master cylinder adapter and quick-fit bleeder hoses, open the bleeder fittings, press the "exchange brake fluid" switch and press "vacuum bleeder" switch(es) to choose desired wheel(s).

Old fluid is removed and replaced by clean, new fluid in just minutes!

All machines are slightly used.

$750.00
Buy Now

BFX-2 Brake Fluid Exchanger

The zMAX® Brake Fluid Exchanger is the new standard for brake fluid service - fast, simple, effective, and profitable. This machine does the job right. It effectively removes old brake fluid and automatically replaces it with new clean fluid. A special push/pull process flushes the entire system and provides the highest quality service. Provides maximum performance, throughout. Fast, Simple, and User Friendly

  • Universal adapters with vehicle reference quick guide for easy hook-up
  • Logical controls with intuitive layout
  • Automatic shut-off and Illuminated warning lights when new fluid tank is empty and used tank is full
  • Easy hose hook-up and storage when service is complete
  • Convenient pistol wand allows quick and accurate filling of master cylinder


Connect to the vehicle then complete the fluid exchange in only 5-10 minutes! Machine Operation is as easy as 1-2-3!

1. Empty master cylinder: Press the "empty master cylinder" switch and insert the drain hose into the master cylinder.

2. Fill master cylinder: Attach wand to fill hose, press "fill master cylinder" switch and squeeze the wand trigger to fill master cylinder to max marking on reservoir.

3. Exchange brake fluid: Attach master cylinder adapter and quick-fit bleeder hoses, open the bleeder fittings, press the "exchange brake fluid" switch and press "vacuum bleeder" switch(es) to choose desired wheel(s).

Old fluid is removed and replaced by clean, new fluid in just minutes!

All machines are slightly used.

$400.00
Buy Now

DFX-1 Differential Fluid Exchanger

The zMAX® DFX-1 Differential Fluid Exchanger offers Differential Fluid Exchange Service with this fast, reliable, and easy to operate machine.

  • Quick and profitable, complete service time 10-15 minutes average
  • Powerful pump (120 Volt) moves heavy gear oil
  • Provides professional, thorough exchange of fluid
  • Easy service access, direct interface with differential
  • Easy mobility with 4-heavy duty casters
  • Simple operation, just flip a switch and begin drain or fill
  • Convenient shelf and small footprint saving valuable shop space
  • Clean operation, valved hose ends prevent fluid spill
  • Provides a needed profitable service


All machines are slightly used.

$400.00
Buy Now

MCX-2 Multi-Coolant Exchanger with Pressure Test Feature

The zMAX® Multi-Coolant Exchanger is THE machine for the quickest, most complete exchange... for any type of antifreeze.

MCX System - Use the Multiple Coolant Exchange (MCX) System for simple, rapid switching of one coolant type to another. Quick switching from traditional green antifreeze to Dex-CoolTM or others. The first machine to address modern coolant service needs! Comes standard with one 15 gallon waste tank and two 7.5 gallon fill tanks for two different antifreeze types. Additional tanks are available at a low cost.

Extra Pumping Power - Exchange coolant in most vehicles in 1-to-3 minutes! The fastest service time in the industry!

Superior Exchange Efficiency - "Engine Off" operation, reverse flushing and extra pumping power provide the most complete coolant exchange. Single-pass average exchange is 92-98%, the industry's best! Removes contamination and particulates efficiently on a hot or cold vehicle from the engine block, water core, water pump, hoses and radiator.

Easy Operation - Simple controls and quick coupler connection system make operation extremely fast, clean and easy. Simple connection to upper radiator hose with universal step adapters. Absolutely no hose cutting.

All machines are slightly used.

$250.00
Buy Now

PSX-2 Power Steering Fluid Exchanger with Mobile Cart and Control Wand

The zMAX® Power Steering Fluid Exchanger offers power steering fluid exchange service with this fast, reliable and easy to operate machine.

  • Multi-Fluid capability
  • Fast, accurate, dual pump operation
  • Quick and profitable, complete service time in 5-15 minutes average
  • Provides professional, thorough exchange of fluid
  • Easy service access-direct interface with power steering fluid reservoir
  • Easy mobility with 4-heavy duty casters
  • Simple operation, just flip a switch and begin exchanging fluid
  • Clear two-channel hose provides excellent new versus used fluid visual
  • Convenient shelf and small footprint which saves valuable shop space
  • Professional appearance helps sell legitimate OEM recommended service
  • Clean operation, hose end cap prevents fluid spill
  • Remote wand allows machine control at power steering fluid reservoir


All machines are slightly used.

$125.00
Buy Now

75600 Fuel System Cleaner Application Tool with Sight Glass

The zMAX® Fuel System Cleaner Application Tool allows the technician to perform an "on engine" cleaning of the entire fuel system.

  • A "Fluid-Flow" Sight Glass - unique see-through housing so product usage can be monitored.
  • The Ability to Pressure-Check the Fuel System - pressure regulator for accurate use. - pressure-release button and quick shut-off valve for safety.
  • The Product Fill Area Has a Funnel Design to avoid spills
  • A Steel-braided Outlet Hose with Protective Rubber Coating
  • A 30-ounce Fluid Capacity for Combined Product Applications
  • Works Off Shop Air, No Aerosol Cans Required
  • Connects Directly to the Vehicle's Fuel Rail

Simplify the process! Fuel induction systems in today's vehicles are more sophisticated than ever. Because of modern designs and increased performance requirements, fuel-system deposits can greatly affect engine performance and cause driveability problems. Replacing or manually cleaning fuel-system components can be costly, ineffective, and time consuming. The fast, effective way to remove fuel-system deposits and improve driveability is to introduce one of zMAX®'s premium cleaners into the system using the Cleaner Application Tool. This tool is a versatile apparatus that, when used with various adapters and cleaners, can remove deposits from the entire fuel system including fuel injectors, combustion chambers and air-intake.

The Service: To start the process, cleaner is added to the large capacity canister through a convenient funnel shaped fill area. Once the cap is in place, shop air is attached to pressurize the tool. The steel braided outlet hose can be attached to the fuel rail through various adapters. An air regulator and intake valve control the flow rate of product into the system. Next, a Fluid-Flow sight glass allows the technician to monitor usage and indicates when the service is finished.

All machines are slightly used.

 

$250.00
Buy Now

zCLEAN Fuel System Cleaner (complete Adapter Kit, S-Tool, Throttle Depressor)

The zMAX® zClean Machine is a professional state- of-the-art Injector, and Combustion Cleaner system.

Adapter Kit      Throttle Body Depressor    Throttle Body Depressor

The zClean Machine has several unique treatment procedures:
A. The most common treatment is the use of zMAX® Autoclean #1 Injector Cleaner through the "Fuel Rail", and zMAX® Autoclean #2 with zMAX® Combustion Cleaner through the "Fuel Rail". No "S" tool is used in this procedure.
B. The most effective fuel system cleaning procedure is to use the combination "S" tool and "Fuel Rail" hook-up. Keep the "S" tool valve turned OFF for the first zMAX® Autoclean #1 canister cleaning. This first machine procedure cleans injectors through the "Fuel Rail". When the machine switches over to zMAX® Autoclean #2 canister with zMAX® Combustion Clean, TURN THE "S" TOOL VALVE ON FOR 2 MINUTES. This will treat the induction system, airhorn throttle butterfly valve area and will clean and lubricate the idle motor component. Turn valve off and the remainder of treatment goes through the "Fuel Rail" treating combustion components.
C. If the system MASS AIR FLOW VALVE is located in front of the butterfly valve, DO NOT use the "S" tool as damage may occur to the valve. Use the black "S" tool adapter and discharge product through a manifold vacuum hose.

All machines are slightly used.

 

©2008 zMAX Micro-lubricant ALL RIGHTS RESERVED